Aerial Work Platform for Cranes
Find the right hydraulic or electrohydraulic aerial work platform for your crane at Platforms
Absolute stability, at any height
Platforms aerial work platforms for cranes are built on over 50 years of experience working at height. They attach to the crane and bring operators exactly where they're needed, with a stable, controlled work surface in any condition.
Every product is designed to deliver stability, ease of use, and complete safety and operational efficiency.
The fixed point at the top of the crane
Platforms' aerial work platforms are designed for those who need to operate at height with precision and total control, even in the most demanding conditions.
By connecting directly to the crane's system, the aerial work platform turns every operation at height into something precise, stable and safe.
The direct connection to the crane's hydraulic system continuously powers the levelling and rotation mechanisms: the work surface stays perfectly horizontal regardless of the machine's movements. Hydraulic rotation, controllable via lever up to ±90°, allows you to reach any working position with precision without repositioning the crane.
The integrated load control system alerts the operator when the weight limit is reached and locks operation if it is exceeded.
Each aerial work platform (hydraulic or electrohydraulic) is designed to accommodate up to three operators, allowing work at height to be carried out in an organised and efficient way.
Hydraulic or electrohydraulic aerial work platforms?
Two versions, one philosophy.
An hydraulic lifting platform draws directly from the crane's system, which supplies the oil needed to manage levelling and rotation continuously and precisely — a seamless connection between machine and equipment.
Electrohydraulic aerial work platforms come with their own power unit, managed by an advanced electronic board and an integrated battery kit that powers the motor independently: wiring with the crane is simplified, compatibility is broader, with no compromise on performance.
Same stability, same control, same results at height — the choice depends on the crane and the job site.
Uncompromising quality
Behind every Platforms aerial work platform lies half a century of experience in designing equipment for work at height. Built for the most demanding conditions, Platforms aerial work platforms combine advanced hydraulic technology and Italian craftsmanship in every detail.
Every component is engineered to deliver operational reliability at height, cycle after cycle, in any working condition.
Why Platforms
Safety, reliability, efficiency and build quality are the values that have driven every Platforms product for over 50 years.
A division of Ormet S.r.l. specialising in the manufacture of personnel baskets and hydraulic aerial work platforms for cranes, Platforms develops technical solutions designed to deliver high performance and maximum efficiency and safety at height.
Every application has its own specific requirements and calls for the right engineering response: that's why every product is built around the customer's operational context, not the other way around.
Backed by a solid base of accumulated know-how and entirely Italian manufacturing, our products stand out for their reliability, constructional precision and compliance with the most stringent industry standards.
Before choosing an aerial work platform, crane compatibility must always be verified. The key criteria to check are:
- Sufficient residual capacity: the crane must guarantee adequate capacity in the actual working configuration (at the radius and height the platform will be used at, not just the crane’s maximum rated capacity) accounting for the weight of the platform, operators and any tools or materials carried aloft.
- Attachment system: the connection point must be compatible with the crane’s jib; where needed, a custom-sized attachment adaptor can be supplied to ensure correct fitting even on non-standard cranes.
- Crane safety devices: hydraulic cylinder lock valves (preventing uncontrolled descent in the event of hose failure) and an emergency lowering device, to bring the platform safely back down even in case of motor failure or power loss.
- Load limiters and wind sensors: load limiters must be set to the specific platform’s rated capacity, automatically blocking any load-increasing movement if exceeded; wind sensors signal when the manufacturer’s wind speed threshold has been reached, requiring an immediate return to ground.
- Regulatory compliance and operational requirements: products are designed and certified to BS EN 280 (the standards for mobile elevating work platforms) and carry the relevant UKCA/CE markings. In Great Britain, ongoing use is governed by LOLER 1998 (thorough examination requirements, noting that equipment for lifting persons requires a statutory thorough examination at least every 6 months) and PUWER 1998 (operator training and equipment suitability); equipment must always be used strictly in line with the manufacturer’s instructions.
Every crane has its own characteristics, and the right combination of crane model and equipment type requires a dedicated technical check. That’s why, before purchase, the Platforms team assesses compatibility and regulatory conformity with you, to identify the right solution with no surprises during installation.
Aerial work platforms or crane baskets?
Self-levelling aerial work platforms and man baskets share the same purpose — getting operators to height — but are very different tools in terms of technology and application.
Crane baskets attach mechanically to the crane boom via a certified hook and require no auxiliary hydraulic system. Levelling can be passive (gravity-based), mechanically controlled, or in more advanced models actively electronic, but remains primarily a stabilising function.
Aerial work platforms, on the other hand, operate with an integrated active hydraulic system connected to the crane’s circuit, providing continuous automatic levelling and lever-controlled hydraulic rotation up to ±90°, reaching optimal working positions with precision without having to reposition the crane.
|
Crane basket Attaches mechanically to the boom via a certified hook, with no auxiliary hydraulic system required. Compatible with any crane fitted with a certified hook.
|
Aerial work platform Integrated active hydraulic system connected to the crane’s circuit. Continuous automatic levelling and hydraulic rotation up to ±90°. For teams working at height where precision is non-negotiable.
|
In short: the crane basket is the right choice for quick, standardised operations. The aerial work platform is the answer when precision, stability and teamwork make the difference — restoration projects, industrial maintenance, large-scale structures. Requires a crane with a compatible auxiliary hydraulic system.